autodesk revit families
You are here:

Autodesk REVIT Families

Level 2 BIM Compliant Autodesk REVIT families for use in basement design and planning

All of our hydraulic bracing and bracing strut ranges are available to download as REVIT families below. Intended for use in major basement propping schemes, the families allow you to model the framing requirements, check for clashes with the permanent structure and sequence the installation of the temporary works. All the families are Level 2 BIM compliant, complete with attributes such as weights and material properties. For an example of where we have used these families for BIM, please see the Drax Ecostore Case Study.

The bracing strut range are work plane based families, allowing them to be used as raking struts. For advice on the compatibility and suitability of our equipment, please seek guidance from our Technical File or design department.

You will require REVIT 2018 or later to use these families

Updates

Our REVIT families are continually being updated, if you would like to be notified by email when updates are made to this page then please register for updates.

Whilst MGF have made every effort to ensure validity of REVIT Families supplied, MGF cannot accept any liability whatsoever for their usage by a third party.

Downloads

We advise using Google Chrome to download the below.

Boxes

Blue and white file icon with the letters RFA at the bottom MGF 100 Telescopic Struts (Last Updated : August 2020)

Blue and white file icon with the letters RFA at the bottom MGF 150 Rigid Struts (Last Updated : August 2020)

Blue and white file icon with the letters RFA at the bottom MGF 150 Telescopic Struts (Last Updated : August 2020)

Blue and white file icon with the letters RFA at the bottom MGF Drag Boxes (Last Updated : August 2020)

Blue and white file icon with the letters RFA at the bottom MGF HCTB Struts (Last Updated : August 2020)

Blue and white file icon with the letters RFA at the bottom MGF HCTB (Last Updated : August 2020)

Blue and white file icon with the letters RFA at the bottom MGF Manhole Boxes (Last Updated : August 2020)

Blue and white file icon with the letters RFA at the bottom MGF Trench Boxes (Last Updated : August 2020)

Blue and white file icon with the letters RFA at the bottom MGF Utility Trench Box (Last Updated : August 2020)

Blue and white file icon with the letters RFA at the bottom MGF Utility Trench Box Struts (Last Updated : August 2020)

Blue and white file icon with the letters RFA at the bottom MGF Utility Endsafe Panels (Last Updated : August 2020)

GRP

Blue and white file icon with the letters RFA at the bottom  GRP Endsafe (Last Updated : August 2020)

Blue and white file icon with the letters RFA at the bottom GRP Hydraulics (Last Updated : August 2020)

Blue and white file icon with the letters RFA at the bottom GRP Ladders (Last Updated : August 2020)

Blue and white file icon with the letters RFA at the bottom GRP Sheets (Last Updated : August 2020)

Blue and white file icon with the letters RFA at the bottom GRP Trench Box (Last Updated : August 2020)

Blue and white file icon with the letters RFA at the bottom GRP Vertishore (Last Updated : August 2020)

Blue and white file icon with the letters RFA at the bottom GRP Walers (Last Updated : August 2020)

Manhole Brace

Zip folder icon behind a blue file icon witht he letters RFA at the bottom MGF Manhole Brace (Last Updated : August 2020)

Safety Equipment

Zip folder icon behind a blue file icon witht he letters RFA at the bottom MGF Edgesafe (Last Updated : August 2020)

Zip folder icon behind a blue file icon witht he letters RFA at the bottom MGF Endsafe Panels (Last Updated : August 2020)

Zip folder icon behind a blue file icon witht he letters RFA at the bottom MGF Laddersafe (Last Updated : August 2020)

Sheets

Blue and white file icon with the letters RFA at the bottom  MGF Corner Piles (Last Updated : August 2020)

Blue and white file icon with the letters RFA at the bottom MGF Sheet Piles (Last Updated : August 2020)

Blue and white file icon with the letters RFA at the bottom MGF Trench Sheets (Last Updated : August 2020)

Bracing Struts

Zip folder icon behind a blue file icon witht he letters RFA at the bottom MGF 200 Series (Last Updated : August 2020)

Zip folder icon behind a blue file icon witht he letters RFA at the bottom MGF 200-300 Series Swivels (Last Updated : August 2020)

Zip folder icon behind a blue file icon witht he letters RFA at the bottom MGF 300 Series (Last Updated : August 2020)

Zip folder icon behind a blue file icon witht he letters RFA at the bottom MGF 400 Series (Last Updated : August 2020)

Zip folder icon behind a blue file icon witht he letters RFA at the bottom MGF 400 Series Swivels (Last Updated : August 2020)

Zip folder icon behind a blue file icon witht he letters RFA at the bottom MGF 600 Series (Last Updated : August 2020)

Zip folder icon behind a blue file icon witht he letters RFA at the bottom MGF 1000 Series (Last Updated : August 2020)

Tank Brace

Blue and white file icon with the letters RFA at the bottom  MGF 203UC Tank Brace (Last Updated : August 2020)

Blue and white file icon with the letters RFA at the bottom MGF 254UC Tank Brace (Last Updated : August 2020)

Blue and white file icon with the letters RFA at the bottom MGF 305UC Tank Brace (Last Updated : August 2020)

Blue and white file icon with the letters RFA at the bottom MGF 406UC Tank Brace (Last Updated : August 2020)

Blue and white file icon with the letters RFA at the bottom MGF T700 (Last Updated : August 2020)

Walers

Zip folder icon behind a blue file icon witht he letters RFA at the bottom MGF Walers (Last Updated : August 2020)

By continuing to use the site, you agree to the use of cookies. more information

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.

Close