Revit
You are here:

Autodesk REVIT Families

Level 2 BIM Compliant Autodesk REVIT families for use in basement design and planning

All of our hydraulic bracing and bracing strut ranges are available to download as REVIT families below. Intended for use in major basement propping schemes, the families allow you to model the framing requirements, check for clashes with the permanent structure and sequence the installation of the temporary works. All the families are Level 2 BIM compliant, complete with attributes such as weights and material properties. For an example of where we have used these families for BIM, please see the Drax Ecostore Case Study.

The bracing strut range are workplane based familes, allowing them to be used as raking struts. For advice on the compatibility and suitability of our equipment, please seek guidance from our Technical File or design department.

You will require REVIT 2014 or later to use these families

Updates

Our REVIT families are continually being updated, if you would like to be notified by email when updates are made to this page then please register for updates

Whilst MGF have made every effort to ensure validity of REVIT Families supplied, MGF cannot accept any liability whatsoever for their usage by a third party.

Downloads

Hydraulic Bracing Systems

rfa Revit Families MGF 203UC Brace (Last Updated : November 2013)

rfa Revit Families MGF 254UC Brace (Last Updated : November 2013)

rfa Revit Families MGF 305UC Brace (Last Updated : November 2013)

rfa Revit Families MGF 406UC Brace (Last Updated : November 2013)

rfa Revit Families MGF Vertical Restraint / Support Brackets (Last Updated : November 2013)

 

Bracing Strut Systems

rfazip2 Revit Families MGF 200 Series (Last Updated : November 2013)

rfazip2 Revit Families MGF 300 Series (Last Updated : November 2013)

rfazip2 Revit Families MGF 400 Series (Last Updated : November 2013)

rfazip2 Revit Families MGF 600 Series (Last Updated : November 2013)

rfazip2 Revit Families MGF 1000 Series (Last Updated : November 2013)

 

Trench Sheets & Sheet Piles

rfa Revit Families MGF Sheet Piles (Last Updated : November 2013)

rfa Revit Families MGF Trench Sheets (Last Updated : November 2013)

 

 

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.

Close